i love this ring to death, but the more i look at it, the more i feel that the side-stones are a bit too large for the center stone. I tried covering up the sides and look at it as a solitaire and feel that the center stone looks larger when without side-stones. what do you guys think? should i have the sides downgrade to 0.25ct each? switch the pears to round stones? reset it as a solitaire?
my friend had once commented that it might be the prongs that are too thick, making the side-stones look bigger...
from time to time i feel like my ring looks like a large marquis diamond sideways, rather than having a distinct center with side-stones...
honest opinion needed here, and really much appreciated!
here are the specs!
RB Center Stone:
1.72ct, F color, VVS2
7.69 x 7.73 x 4.70
EX/EX/EX
Fluorescence: NONE
depth% 61
table% 58
crown angle 35
pavilion angle 40.6
culet 0
Total Visual Performance by HCA rating = 1 , TIC range
Pear side stones:
0.6ct total, F color, VS
Setting: D Vatche
Size: 5
Diamond source: I.D. Jewelry in NYC
my friend had once commented that it might be the prongs that are too thick, making the side-stones look bigger...
from time to time i feel like my ring looks like a large marquis diamond sideways, rather than having a distinct center with side-stones...
honest opinion needed here, and really much appreciated!
here are the specs!
RB Center Stone:
1.72ct, F color, VVS2
7.69 x 7.73 x 4.70
EX/EX/EX
Fluorescence: NONE
depth% 61
table% 58
crown angle 35
pavilion angle 40.6
culet 0
Total Visual Performance by HCA rating = 1 , TIC range
Pear side stones:
0.6ct total, F color, VS
Setting: D Vatche
Size: 5
Diamond source: I.D. Jewelry in NYC