Bangle & Bracelet Holders Needed.

[Millicat]

I'm looking for bangle holders, however, I cannot find a suitable one, I need a bangle/bracelet stand that is ,,,
a) on a sturdy base
b) in a pale or neutral colour
c) ideally not made of a hard material but soft
d) not ridiculously expensive in postage.

Does anyone have bangle/bracelet holders that are essentially a soft vertical bar that's attached/sits on a 'pole', which then sits on a solid base ?

Bangles that aren't slim gold bands but made of stone/agate/amber/ etc are going to be heavy, chunky and wide (up to 2.5cm), up to 25cm outer, 18cm inner circumferences and a lot I've seen would just topple over with this kind of jewellery on there.

If anyone has come across an item that would comfortably fit this bill i'd be everso grateful for some supplier information.

 

[livethelake]

I use this style. They are available in multiple colors and come in single, double, triple rows.

Do a search on ebay for bracelet holders. There are lots of options.

http://www.ebay.com/itm/New-High-Qu...488?pt=LH_DefaultDomain_0&hash=item19f14f3578

 

[blumster]

I use this style. They are available in multiple colors and come in single, double, triple rows.

Do a search on ebay for bracelet holders. There are lots of options.

http://www.ebay.com/itm/New-High-Qu...488?pt=LH_DefaultDomain_0&hash=item19f14f3578

Will this one hold Hermes Clic clacks, cartier love and juste un clou? If anyone has these three pieces and can suggest a good holder, I would really appreciate it!

 

[Millicat]

I use this style. They are available in multiple colors and come in single, double, triple rows.

Do a search on ebay for bracelet holders. There are lots of options.

http://www.ebay.com/itm/New-High-Qu...488?pt=LH_DefaultDomain_0&hash=item19f14f3578

I've checked Ebay numerous times but don't see items that would fit my specific requirements.
I've checked Etsy too but still nothing that I would like.

 

[bagsforme]

Michaels craft store has them available in one, two or three row. I seen them in black velvet but I think they have neutral ones too. They were around $20.

 

[livethelake]

Will this one hold Hermes Clic clacks, cartier love and juste un clou? If anyone has these three pieces and can suggest a good holder, I would really appreciate it!

I use it for my clic H's and other bangles and bracelets. Not sure about the size of you JUC or love so I can't comment.

These type of holders come in multiple sizes. Check the auction text and most will give you the diameter of the holder and you can compare with your bracelet.

I have 2 of these holders in different sizes. They are sturdy and hold a lot of bracelets.

Hope this helps

 

[livethelake]

I took a quick picture of mine

It measures approx 1 1/2" in diameter and easily fits my JUC (size 18) and H bracelets

 

[Jesssh]

I have this one, but it does not have a soft bar. I suppose you could make a sleeve. It seems pretty sturdy.

http://www.containerstore.com/shop/jewelryStorage/countertopVanity?productId=10025829

 

[Hermes Nuttynut]

I'm looking for bangle holders, however, I cannot find a suitable one, I need a bangle/bracelet stand that is ,,,
a) on a sturdy base
b) in a pale or neutral colour
c) ideally not made of a hard material but soft
d) not ridiculously expensive in postage.

Does anyone have bangle/bracelet holders that are essentially a soft vertical bar that's attached/sits on a 'pole', which then sits on a solid base ?

Bangles that aren't slim gold bands but made of stone/agate/amber/ etc are going to be heavy, chunky and wide (up to 2.5cm), up to 25cm outer, 18cm inner circumferences and a lot I've seen would just topple over with this kind of jewellery on there.

If anyone has come across an item that would comfortably fit this bill i'd be everso grateful for some supplier information.

Hi Millicat!

Do you have a Michael's Craft Store near you? They have several varieties covered in black velvet that are very nice and not cheap looking. And look for coupons online. There are usually some available.

 

[Millicat]

Hi Millicat!

Do you have a Michael's Craft Store near you? They have several varieties covered in black velvet that are very nice and not cheap looking. And look for coupons online. There are usually some available.

Hi Hermes Nuttynut
I don't think so, would you be able to post a pic of the one your thinking of

 

[Hermes Nuttynut]

Hi Hermes Nuttynut
I don't think so, would you be able to post a pic of the one your thinking of

I'll even do better than that. You can order online!! Here's the link:

http://www.michaels.com/darice-triple-bar-black-velvet-jewelry-stand/10162806.html

On sale. That's a really good price for it.

 

[Junkenpo]

I use this style. They are available in multiple colors and come in single, double, triple rows.

Do a search on ebay for bracelet holders. There are lots of options.

http://www.ebay.com/itm/New-High-Qu...488?pt=LH_DefaultDomain_0&hash=item19f14f3578

"Does not ship to Alaska or Hawaii" - Dang! lol

 

[Millicat]

I'll even do better than that. You can order online!! Here's the link:

http://www.michaels.com/darice-triple-bar-black-velvet-jewelry-stand/10162806.html

On sale. That's a really good price for it.

I couldn't process the transaction because their system doesn't take UK addresses, thank you though, that's the sturdiest base I've seen yet.

 

[livethelake]

I couldn't process the transaction because their system doesn't take UK addresses, thank you though, that's the sturdiest base I've seen yet.

the same style is available on ebay, you can find many options by searching for bracelet stands.

Here is one in the UK

http://www.ebay.com/itm/1-x-Black-V...ewelleryBoxes_Supplies_CA&hash=item4d0330dde8

 

[Millicat]

This is the one I went with in the end, from Amazon, made of cream coloured faux leather and a sturdy base, the dimensions of the tubes are 5cm across, with a 15cm circumference - which means that my smaller bangles and beaded bracelets are too small to fit over them.